What is the success rate of data recovery?

Answer:

If a USB flash drive (pendrive) is not detected by your computer, there could be several potential causes and solutions. Here’s a step-by-step guide on how to troubleshoot and address the issue: ### **1. Basic Troubleshooting** - **Check Connections:** - **USB Port:** Try plugging the pendrive into a different USB port on your computer. - **USB Cable/Hub:** If you’re using a USB hub or extension cable, try connecting the pendrive directly to the computer. - **Inspect the Pendrive:** - **Physical Damage:** Check the pendrive for any visible damage or loose parts. - **Clean the Connector:** Ensure the USB connector is clean and free from debris. - **Restart Your Computer:** - Sometimes, a simple restart can resolve detection issues. ### **2. Check Device Manager (Windows)** - **Open Device Manager:** - Right-click on the Start button and select "Device Manager." - **Locate USB Devices:** - Look under "Universal Serial Bus controllers" for any USB devices with a yellow triangle or error message. - **Update or Reinstall Drivers:** - **Update Driver:** Right-click on the problematic device, select "Update driver," and follow the prompts. - **Reinstall Driver:** Right-click on the device, select "Uninstall device," then unplug and replug the pendrive to reinstall the driver automatically.

### **3. Check Disk Management (Windows)** - **Open Disk Management:** - Right-click on the Start button and select "Disk Management." - **Locate the Pendrive:** - Check if the pendrive appears in the list of drives. It may not have a drive letter assigned or may need to be initialized. - **Assign a Drive Letter:** - Right-click on the pendrive and select "Change Drive Letter and Paths," then assign a new drive letter. - **Initialize or Format:** - If the pendrive is unallocated or not initialized, right-click and select "Initialize Disk" or "Format" (note: formatting will erase all data). ### **4. Check for Hardware Issues** - **Test on Another Computer:** - Plug the pendrive into a different computer to see if it’s recognized. This helps determine if the issue is with the pendrive or the original computer. - **Test with Another Pendrive:** - Try using another USB device in the same port to check if the port is functioning properly. ### **5. Use Data Recovery Tools** - **Recover Data:** - If the pendrive is recognized but data is inaccessible, use data recovery software such as Recuva, EaseUS Data Recovery Wizard, or Disk Drill to attempt data recovery. ### **6. Check for System Updates** - **Windows Update:** - Ensure your operating system is up-to-date with the latest updates and patches. ### **7. Check for Virus or Malware** - **Run a Scan:** - Perform a full system scan using antivirus or anti-malware software to ensure that malware is not affecting USB device detection. ### **8. Consult Professional Help** - **Data Recovery Services:** - If the pendrive is still not detected and contains critical data, consider consulting a professional data recovery service.

### **Summary:** 1. **Basic Troubleshooting:** Check connections, try different ports, and restart the computer. 2. **Device Manager:** Update or reinstall drivers for the pendrive. 3. **Disk Management:** Check for the pendrive, assign a drive letter, or initialize/format if necessary. 4. **Hardware Issues:** Test the pendrive on another computer or with another USB device. 5. **Data Recovery:** Use recovery tools if data is inaccessible. 6. **System Updates:** Ensure your operating system is up-to-date. 7. **Virus/Malware Check:** Run a scan to rule out malware issues. 8. **Professional Help:** Consult a data recovery service if needed. By following these steps, you can diagnose and address the issue of a pendrive not being detected and potentially recover any important data.